The sliding column structure of the 4V solenoid valve has relatively good sealing performance, and the response is also very sensitive during operation. It can be used with multiple standard voltage levels 

for selection, and can be integrated with the base valve group to save installation space. Before use, we need to pay attention to and check whether the components are damaged during operation, and then 

install and use them. Please pay attention to the correct direction of gas flow and the shape of the connecting pipe during installation. The medium used must be filtered through a 40um filter element. When 

debugging the entire machine, it is recommended to first use a manual device for debugging, and then power on for debugging

1. Before use, pay attention to checking whether the components are damaged during operation, and then install and use them

2. Please pay attention to the correct direction of gas flow and the shape of the connecting pipe during installation. The medium used must pass through a 40um filter cartridge

3. Please pay attention to whether the installation conditions meet the technical requirements (such as voltage, "operating frequency, working pressure", "operating temperature range

And then install and use it

4. During installation, pay attention to the direction of gas flow. P is the inlet, A (B) is the working port, and R (S) is the exhaust port

5. Try to avoid using it in a moving environment and pay attention to anti freezing measures at low temperatures

6. When connecting pipelines, be careful not to wrap the sealing tape beyond the end face of the joint teeth, and clean the dust and iron inside the pipeline joints

Dirt, prevent impurities or foreign objects from entering the valve body

7. Please pay attention to dust prevention. It is recommended to install a muffler or noise reduction throttle valve at the exhaust port. When not in use, dust should be installed at the inlet and outlet ports

set

8. When debugging the entire machine, it is recommended to first use a manual device for debugging, and then power on to debug the 4V210 solenoid valve manufacturer